Na'urar Banding ta atomatik GE368
Na'urar Banding Edge ta atomatikyana daya daga cikin na'urorin da masana'antun kera kayan daki za su saya, kuma kayan aiki ne da babu makawa a cikin layin samar da kayan daki.
Cikakken Injin:
Bander bakiInjin dole ne don samar da kayan daki irin na faranti.
Ya dace da madaidaiciyar baƙar fata da kuma datsa na matsakaicin yawa fiberboard, blockboard, katako mai ƙarfi, allon katako, allon ƙofar polymer, plywood, da sauransu.
Bayani:
| Ƙungiyar Inji | Na'urar Banding Edge ta atomatik |
| Aiki | Manne da Latsa-> Yanke Ƙarshen-> Gyaran Ƙarshen-> Gyaran Ƙaƙwalwa-> Scraping-> Buffing |
| Jimlar Ƙarfin | 10.4KW |
| Gudun Ciyarwa | 15-23m/min |
| Edge Band Kauri | 0.4-3 mm |
| Kauri Panel | 10-60 mm |
| Tsawon Panel | ≥150mm |
| Fadin panel | ≥40mm |
| Aiki matsa lamba | 0.6Mpa |
| Girman karamin panel (L*W) | 350*40mm, 150*150mm |
| Nauyi | 1495 kg |
| Girman Injin | 4417*830*1610mm |
TheEdge Banding Machinezai iya yin makaɗa mai linzamin linzamin kwamfuta, gyarawa da goge goge a kan fale-falen kayan daki tare da daidaito da inganci.Duk da haka, mutane da yawa suna watsi da kula daEdge Banding Machinea cikin tsarin yin amfani da na'ura mai baƙar fata.Ko da yake kula daEdge Banding Machinena iya cinye wani adadin ma'aikata da kayan aiki, zai iya tsawaita rayuwar sabis naEdge Banding Machineda inganta ingantaccen aiki.Saboda haka, kula dana'ura mai ban sha'awayana da matukar muhimmanci.Bayan haka, zan gabatar muku da manyan abubuwa guda hudu na kula da abubuwanEdge Banding Machine.
1. Tsabtace akai-akai.Da farko, dole ne mu tsaftace katakon katako da tarkacen itace daban-daban da aka haifar yayin aikin samar da kayan aikiEdge Banding Machinedon hana tarin katako daga haifar da na'ura don matsewa, wanda ke shafar yadda ake amfani da shi na yau da kullunEdge Banding Machine.Abu na biyu, wajibi ne don tsaftace wasu tabo a saman injin a cikin lokaci don kiyayewaEdge Banding Machinemai tsabta.Yana da tsabta kuma yana hana abubuwa masu cutarwa daga lalacewa da lalata saman fuselage mai rufe baki.
2. Sa maiEdge Banding Machineakai-akai.Ya kamata a ƙara man mai mai daɗaɗɗen mai a cikin sassan kowane yanki nana'ura mai ban sha'awaakai-akai, kuma dole ne a zaɓi mai mai da ya dace, in ba haka ba zai shafi al'ada amfani daEdge Banding Machine.
3. Dubawa akai-akai.TheEdge Banding Machineya kamata a duba kuma a kula da shi akai-akai.A lokacin aikin kiyayewa, wasu suna sa yanayin gears, bearings da sauran sassa naEdge Banding Machineya kamata a duba a hankali, kuma a maye gurbin sassan da aka sawa sosai a cikin lokaci.
4. Kula da tsarin kwamfuta naEdge Banding Machine.YauEdge Banding Machinegalibi an haɗa shi da kwamfuta, ta yadda za a gane aikin shirye-shiryen kwamfuta ta atomatik.Idan aka samu matsala a tsarin na’ura mai kwakwalwa, hakan kuma zai shafi yadda ake amfani da na’ura ta yau da kullun.
Aikace-aikace:
Amfani:
●Ana'ura mai ban sha'awajiki an yi shi da 18mm kasa misali high-karfe farantin karfe, keɓaɓɓen fasahar walda, akwatin-nau'in tsarin jiki, bayan high zafin jiki quenching jiyya, ba shi da sauki a samu nakasu na dogon lokaci, da kuma nauyi-taƙawa gantry machining cibiyar ne. sarrafa a lokaci daya.A flatness ne musamman high!
●Conveyor bel jagora dogo an yi daga hali karfe, Chrome-plated, lalacewa-resistant kuma ba sauki ga tsatsa, high straightness, low gogayya coefficient, kuma barga isar a wani uniform gudun!
● Motar da ke jigilar kaya tana ɗaukar nau'ikan da aka keɓance, babban iko, ƙarfin wutar lantarki mai ƙarfi, kuma yana da tsarin kariya ta thermal don ƙara ƙimar aminci!
●Motar mai saurin sauri, cikakken jagorar dogo mai jagora, tsarin pneumatic, silinda iska, bawul ɗin aminci da mai sauya mitar duk suna ɗaukar sanannun sanannun.Sosai m Airtac Magnetic canji da babban m garkuwa garkuwa.
● atomatik dawo da solenoid bawul don tabbatar da kwanciyar hankali na ayyukan 5 miliyan.An sanye shi tare da sarrafa ƙarfin ƙarfin iska don tabbatar da ci gaba da kwanciyar hankali da aikin injin a kowane fanni!
●Ana'ura mai ban sha'awaCNC machining cibiyar ke sarrafa jiki kuma ta kafa shi a lokaci ɗaya kuma an haɗa shi tare da ɓangarorin da aka shigo da su tare da kuskuren 0.05mm don tabbatar da ingantaccen sakamako mai santsi.
●Ana'ura mai ban sha'awajiki ne Laser yanke, saman ne lebur, babu indentation, babu burrs, kuma high girma daidaito.Dukkanin sassan injin ana sarrafa su ta hanyar CNC da aka shigo da su, tare da madaidaicin madaidaicin, tabbatar da tsawon rayuwar sabis da daidaitaccen aiki na sassan!
●Tsarin sarkar jigilar kaya an yi shi ne da silica gel mai inganci ta hanyar kashe simintin gyare-gyaren lokaci ɗaya, kuma juriyarsa ta dace da ƙa'idodin duniya, kuma yana da santsi kuma ba tsalle ba.Tabbatar cewana'ura mai ban sha'awayana samun kwanciyar hankali mai kyau.
FAQ:
Q1: Arfactory ka?
A: Mu kwararre nemasana'anta kayan aikin katako
Q2: Zan iya yin odar OEM?
A: Ee, mun yarda da OEM da kuma musamman
Q3: Yaya zan yi shigarwa nabaki bda kumainji?
A: Muna ba ku jagorar shigarwa kuma idan ya cancanta, za mu aika da ƙungiyar shigarwa zuwa wurin aiki.
Q4: Kuna da MOQ?
A: 1 set
Q5: Yaya tsawon garantin?
A: shekara 1
Jawabin Abokin ciniki:
Kunshin:
